Short pulse laser damage testing on nitrocellulose and polyimide thin films in vacuum with application to laser debris shields

Mark Kimmel; Jens Schwarz; Patrick Rambo; Matthias Geissel; Briggs Atherton

doi:10.1117/12.803825

30 December 2008 Short pulse laser damage testing on nitrocellulose and polyimide thin films in vacuum with application to laser debris shields

Mark Kimmel, Jens Schwarz, Patrick Rambo, Matthias Geissel, Briggs Atherton

Author Affiliations +

Proceedings Volume 7132, Laser-Induced Damage in Optical Materials: 2008; 71321O (2008) https://doi.org/10.1117/12.803825
Event: Boulder Damage Symposium XL Annual Symposium on Optical Materials for High Power Lasers, 2008, Boulder, Colorado, United States

Abstract

High intensity lasers require novel debris mitigation techniques in laser-target experiments. For a PW class system (500 J in 500 fs at 1054 nm), the debris shield thickness is limited by the accumulated B-integral that the laser acquires in transmission. In our case, this sets an upper limit of 500 micron for the debris shield thickness if the added Bintegral is to stay below 1.5. Therefore we have started to investigate the optical properties of various thin films such as Nitrocellulose, Mylar, and Polyimide with respect to their application as laser debris shields. Those results were presented during the last conference in 2007^[1] and it was shown that Nitrocellulose and Polyimide are well suited. Damage testing was not performed at this time. We now present short pulse (500 fs at 1054 nm) laser damage testing on these thin films in vacuum. Energy, pulsewidth, beamsize and phase were closely monitored during the damage testing experiments. Nitrocellulose was measured to damage at 1.33 J/cm². Polyimide showed signs of damage at 133 mJ/cm² and began to fully penetrate the film at 670 mJ/cm². Surprisingly, these films do not rupture with tens of closely spaced damage sites being present which makes them ideal candidates for short pulse laser debris shields. Damage testing procedure and apparatus as well as the damage site morphology will also be discussed.

Citation Download Citation

Mark Kimmel, Jens Schwarz, Patrick Rambo, Matthias Geissel, and Briggs Atherton "Short pulse laser damage testing on nitrocellulose and polyimide thin films in vacuum with application to laser debris shields", Proc. SPIE 7132, Laser-Induced Damage in Optical Materials: 2008, 71321O (30 December 2008); https://doi.org/10.1117/12.803825

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE