Translator Disclaimer
Paper
3 October 2008 Development of a multi-resolution measurement system based on light sectioning method
Author Affiliations +
Proceedings Volume 7155, Ninth International Symposium on Laser Metrology; 715538 (2008) https://doi.org/10.1117/12.814618
Event: Ninth International Symposium on Laser Metrology, 2008, Singapore, Singapore
Abstract
With the rapid development of shape measurement technique, multi-resolution approach becomes one of valid way to enhance the accuracy. There are, however, still some key techniques such as simultaneous calibration and data fusion of several sensors being further studied. A multi-resolution system, which use light sectioning method, is developed and has been successful in many application areas for blade of aviation engine example. It can measure the shape of blade at high speed and high accuracy. The system is composed of four laser linear light sources, four or five cameras and three highprecision mechanical movement devices. Two cameras have relatively low amplifying ratios, and focus on the basin or back of blade where the radius of curvature is large. Other cameras have high amplifying ratios, and fix on the entering or ending edge of blade where the radius of curvature is small. So the system has 3600 measurement range and can carry out multi-resolution 3-D shape measurement with greatly different amplifying ratios of cameras. One measurement process has been finished when the blade mounted on mechanical movement device move up or down one time. Also the model building and principle of the measurement system, an algorithm of calibration and data fusion of several cameras are presented that calculate 3-D coordinates of one section of blade. The result shows that the accuracy of the system is about 0.05mm for the sectional circumradius approximately 50 mm measurement range, and also proves the system is feasible and efficient.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiguang Zhang, Hong Zhao, Xiang Zhou, and Lu Zhang "Development of a multi-resolution measurement system based on light sectioning method", Proc. SPIE 7155, Ninth International Symposium on Laser Metrology, 715538 (3 October 2008); https://doi.org/10.1117/12.814618
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top