Evaluation of the x-ray response of amorphous selenium coated 100-micron pitch a-Si active pixel sensors for tomosynthesis applications

Farhad Taghibakhsh; David M. Hunter; Karim S. Karim; George Belev; Safa O. Kasap; Vladimir Verpakhovski; Martin J. Yaffe

doi:10.1117/12.813549

13 March 2009 Evaluation of the x-ray response of amorphous selenium coated 100-μm pitch a-Si active pixel sensors for tomosynthesis applications

Farhad Taghibakhsh, David M. Hunter, Karim S. Karim, George Belev, Safa O. Kasap, Vladimir Verpakhovski, Martin J. Yaffe

Author Affiliations +

Proceedings Volume 7258, Medical Imaging 2009: Physics of Medical Imaging; 72581H (2009) https://doi.org/10.1117/12.813549
Event: SPIE Medical Imaging, 2009, Lake Buena Vista (Orlando Area), Florida, United States

Abstract

We detail the integration of amorphous silicon (a-Si) active pixel sensor (APS) test arrays with an overlying amorphous selenium (a-Se) x-ray photoconductor, and report on results of their x-ray response and imaging properties. The a-Se/a-Si APS arrays incorporate a two-transistor (2T) gate-switched pixel amplifier architecture designed to provide high detector array resolution, as well as a controllable on-pixel gain. The direct x-ray detectors consist of in-house fabricated, dual mode active and passive sensor arrays with detector element (del) pitches of 100 μm and 200 μm, coated with 80 μm thick stabilized amorphous selenium. These selenium layers were selected for preliminary work and represent a quantum efficiency (QE) of 69% for x-ray spectra (tungsten target, 2 mm Al filtration) of 30 kVp. Detector response was evaluated for a-Se biasing electric fields of both 5 V/μm and 10 V/μm. A detector dark current of 110 pA/cm² (0.01 pA/100 μm del) at 10V/μm electric field, a controllable detector conversion gain up to 15.3 nA/mR at 30 kVp were measured. Active pixel gains of 6.7 and 9.6 were measured for 100μm and 200μm pitch detectors respectively. The amplified readout exhibits a better detection limit (by one order of magnitude) compared to the passive readout implemented on the same pixel. Capabilities of amplified pixels such as nondestructive readout, as well as programmable pixel conversion gain, and dynamic range control are demonstrated. In light of their adaptable gain and dynamic range, these detectors represent a promising technology for high-resolution high gain x-ray digital imaging, particularly in mammography tomosynthesis.

Citation Download Citation

Farhad Taghibakhsh, David M. Hunter, Karim S. Karim, George Belev, Safa O. Kasap, Vladimir Verpakhovski, and Martin J. Yaffe "Evaluation of the x-ray response of amorphous selenium coated 100-μm pitch a-Si active pixel sensors for tomosynthesis applications", Proc. SPIE 7258, Medical Imaging 2009: Physics of Medical Imaging, 72581H (13 March 2009); https://doi.org/10.1117/12.813549

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE