Experimental validation of A-mode ultrasound acquisition system for computer assisted orthopaedic surgery

Danilo De Lorenzo; Elena De Momi; Elisa Beretta; Pietro Cerveri; Franco Perona; Giancarlo Ferrigno

doi:10.1117/12.811736

13 March 2009 Experimental validation of A-mode ultrasound acquisition system for computer assisted orthopaedic surgery

Danilo De Lorenzo, Elena De Momi, Elisa Beretta, Pietro Cerveri, Franco Perona, Giancarlo Ferrigno

Author Affiliations +

Proceedings Volume 7265, Medical Imaging 2009: Ultrasonic Imaging and Signal Processing; 726502 (2009) https://doi.org/10.1117/12.811736
Event: SPIE Medical Imaging, 2009, Lake Buena Vista (Orlando Area), Florida, United States

Abstract

Computer Assisted Orthopaedic Surgery (CAOS) systems improve the results and the standardization of surgical interventions. Anatomical landmarks and bone surface detection is straightforward to either register the surgical space with the pre-operative imaging space and to compute biomechanical parameters for prosthesis alignment. Surface points acquisition increases the intervention invasiveness and can be influenced by the soft tissue layer interposition (7-15mm localization errors). This study is aimed at evaluating the accuracy of a custom-made A-mode ultrasound (US) system for non invasive detection of anatomical landmarks and surfaces. A-mode solutions eliminate the necessity of US images segmentation, offers real-time signal processing and requires less invasive equipment. The system consists in a single transducer US probe optically tracked, a pulser/receiver and an FPGA-based board, which is responsible for logic control command generation and for real-time signal processing and three custom-made board (signal acquisition, blanking and synchronization). We propose a new calibration method of the US system. The experimental validation was then performed measuring the length of known-shape polymethylmethacrylate boxes filled with pure water and acquiring bone surface points on a bovine bone phantom covered with soft-tissue mimicking materials. Measurement errors were computed through MR and CT images acquisitions of the phantom. Points acquisition on bone surface with the US system demonstrated lower errors (1.2mm) than standard pointer acquisition (4.2mm).

Citation Download Citation

Danilo De Lorenzo, Elena De Momi, Elisa Beretta, Pietro Cerveri, Franco Perona, and Giancarlo Ferrigno "Experimental validation of A-mode ultrasound acquisition system for computer assisted orthopaedic surgery", Proc. SPIE 7265, Medical Imaging 2009: Ultrasonic Imaging and Signal Processing, 726502 (13 March 2009); https://doi.org/10.1117/12.811736

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE