FEA of dielectric elastomer minimum energy structures as a tool for biomimetic design

Benjamin O'Brien; Todd Gisby; Emilio Calius; Shane Xie; Iain Anderson

doi:10.1117/12.815818

6 April 2009 FEA of dielectric elastomer minimum energy structures as a tool for biomimetic design

Benjamin O'Brien, Todd Gisby, Emilio Calius, Shane Xie, Iain Anderson

Proceedings Volume 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009; 728706 (2009) https://doi.org/10.1117/12.815818
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2009, San Diego, California, United States

Abstract

Ctenophores or "comb jellies" are small sea creatures that propel themselves with rows of ciliated bending actuators or 'paddles'. In some species the actuators are coordinated via mechano-sensitivity; the physical contact of one paddle triggers the motion of the next resulting in a wave of activation along the row. We seek to replicate this coordination with an array of capacitive self-sensing Dielectric Elastomer Minimum Energy Structure(s) (DEMES) bending actuators. For simplicity we focused on a conveyor application in air where four DEMES were used to roll cylindrical loads along some rails. Such a system can automatically adjust to changing load dynamics and requires very little computational overhead to achieve coordination. We used a finite element modelling approach for DEMES development. The model used a hybrid Arruda-Boyce strain energy function augmented with an electrostatic energy density term to describe the DEA behaviour. This allowed the use of computationally efficient membrane elements giving simulation times of approximately 15 minutes and thus rapid design development. Criteria addressing failure modes, the equilibrium state, and stroke of the actuators were developed. The model had difficulty in capturing torsional instability in the frame thus design for this was conducted experimentally. The array was built and successfully propelled teflon and brass rollers up an incline. Noise in the capacitive sensor limited the sensitivity of the actuators however with PCB circuit fabrication this problem should be solved.

Citation Download Citation

Benjamin O'Brien, Todd Gisby, Emilio Calius, Shane Xie, and Iain Anderson "FEA of dielectric elastomer minimum energy structures as a tool for biomimetic design", Proc. SPIE 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009, 728706 (6 April 2009); https://doi.org/10.1117/12.815818

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available