Experimental performance and feasibility of a miniature single-degree-of-freedom rotary joint with integrated IPMC actuator

Sean Manley; Andrew McDaid; Kean Aw; Shane Xie; Enrico Haemmerle

doi:10.1117/12.815412

6 April 2009 Experimental performance and feasibility of a miniature single-degree-of-freedom rotary joint with integrated IPMC actuator

Sean Manley, Andrew McDaid, Kean Aw, Shane Xie, Enrico Haemmerle

Author Affiliations +

Proceedings Volume 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009; 72870I (2009) https://doi.org/10.1117/12.815412
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2009, San Diego, California, United States

Abstract

Ionic Polymer Metal Composite (IPMC) materials are bending actuators that can achieve large tip displacements at voltages less than 10V, but with low force output. Their advantages over traditional actuators include very low mass and size; flexibility; direct conversion of electricity to mechanical energy; biocompatibility; and the potential to build integrated sensing/actuation devices, using their inherent sensing properties. It therefore makes sense to pursue them as a replacement to traditional actuators where the lack of force is less significant, such as micro-robotics; bio-mimetics; medical robotics; and non-contact applications such as positioning of sensors. However, little research has been carried out on using them to drive mechanisms such as the rotary joints. This research explores the potential for applying IPMC to driving a single degree-of-freedom rotary mechanism, for a small-force robotic manipulator or positioning system. Practical issues such as adequate force output and friction are identified and tackled in the development of the mechanical apparatus, to study the feasibility of the actuator once attached to the mechanism. Rigid extensions are then applied to the tip of the IPMC, as well as doubling- and tripling the actuators in a stack to increase force output. Finally, feasibility of the entire concept is considered by comparing the maximum achievable forces and combining the actuator with the mechanism. It is concluded that while the actuator is capable of moving the mechanism, it is non-repeatable and does not achieve a level that allows feedback control to be applied.

Citation Download Citation

Sean Manley, Andrew McDaid, Kean Aw, Shane Xie, and Enrico Haemmerle "Experimental performance and feasibility of a miniature single-degree-of-freedom rotary joint with integrated IPMC actuator", Proc. SPIE 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009, 72870I (6 April 2009); https://doi.org/10.1117/12.815412

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available