Paper
8 April 2009 Using diffuse field interferometry for structural and material characterization in complex aircraft structures
Author Affiliations +
Abstract
Structural health monitoring (SHM) systems often rely on propagating elastic waves through complex structures, which can result in the formation of diffuse-fields. Diffuse fields fill the whole structure with energy and are characterized by energy equi-partition among all propagation modes. Due to their apparent complexity, diffuse-fields are not commonly used by conventional SHM systems. However, recent theoretical and experimental studies have demonstrated that the local Green's functions (GF) can be estimated from the cross-correlation of diffuse wavefields recorded between points of a sensor grid and generated by sources located remotely from the monitoring area. The Diffuse Field Interferometry (DFI) concept yields the GF between all measured points (e.g. nominal response of the structure), effectively transforming each measurement point into a virtual source. The resulting local GFs provide detailed information on the dynamic behavior of the material/structure under investigation. In this work, Green's functions are estimated experimentally from DFI using full-field measurements obtained with a scanning laser vibrometer.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Adelaide Duroux, James Ayers, Karim G. Sabra, and Massimo Ruzzene "Using diffuse field interferometry for structural and material characterization in complex aircraft structures", Proc. SPIE 7295, Health Monitoring of Structural and Biological Systems 2009, 72950X (8 April 2009); https://doi.org/10.1117/12.815667
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Interferometry

Sensors

Structural health monitoring

Aircraft structures

Material characterization

Ultrasonics

Back to Top