Paper
27 April 2009 A model for an omnidirectional radiometer
Author Affiliations +
Abstract
Most radiometers are directionally sensitive. Measuring optical radiation in a given environment is typically done using a collection aperture pointing in the direction of the optical source. The collection aperture has a limited field of view, and the collection efficiency decreases as the angle from direct line of sight increases. Thus, radiometers typically have a limited solid angle for viewing sources. This paper describes a model of an omnidirectional, multi-channel, rotating radiometer that provides a framework for acquiring spatially comprehensive radiometric data from an environment. By exploiting the spatial diversity of multiple collection apertures in multiple directions, sources from all directions are measured via three-dimensional scanning. As the radiometer rotates, data are collected that denote the radiant flux seen by each collection aperture as a function of time. These waveforms are used to determine the directions and magnitudes of electromagnetic sources in the environment without requiring a priori knowledge about the directions of specific sources.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. E. Jansen, L. R. Gauthier Jr., and N. W. Rolander "A model for an omnidirectional radiometer", Proc. SPIE 7316, Fiber Optic Sensors and Applications VI, 73160Q (27 April 2009); https://doi.org/10.1117/12.818650
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Radiometry

Sensors

Radio optics

Solids

Signal detection

Data modeling

Electromagnetism

Back to Top