Reduction of resist charging effect by EB reticle writer EBM-7000

Masato Saito; Kunihiro Ugajin; Osamu Ikenaga

doi:10.1117/12.824287

11 May 2009 Reduction of resist charging effect by EB reticle writer EBM-7000

Masato Saito, Kunihiro Ugajin, Osamu Ikenaga

Author Affiliations +

Proceedings Volume 7379, Photomask and Next-Generation Lithography Mask Technology XVI; 73791A (2009) https://doi.org/10.1117/12.824287
Event: Photomask and NGL Mask Technology XVI, 2009, Yokohama, Japan

Abstract

The requirement for image placement accuracy on photomask has been rising. The ITRS road map says that we need to achieve 4.3nm accuracy in 2012 for HP 36nm device with single exposure process, further more we must achieve 3.0nm accuracy if double patterning process is selected. Fig.1 shows the today's performance of image placement accuracy. Some sample photomasks which have same pattern shape are produced during 3 months, and the mask to mask overlay accuracy of them was measured. The average of them was 3.6nm. This data shows the possibility to achieve the accuracy of photomask for HP 36nm devices. The image placement accuracy of actual device pattern during same period is showed in Fig.2. The image placement accuracy of actual device pattern is worse than that showed before. We categorized these data according to the pattern density, low density pattern and the high density pattern. The density of the test pattern is categorized into very low density pattern. The results are showed in Fig.3. We can see the degrading of image place accuracy according to the pattern density. This degrading of image placement accuracy is caused by resist charging effect. In photomask production process, electron beam writer is mainly used as lithography tool. Each pattern on photomask is formed by step by step exposure of electron beam. The surface of resist film will be charged with exposed electron beam, and electric field will be generated around that charged area. So the orbit of electron beam for next exposure will be bended by the electric field which generated by previous beam shot, and image placement accuracy will degrade. To achieve the demanded image placement accuracy, we need to remove the error caused by this phenomenon. We researched in resist charging effect for correcting it, and we studied that this phenomenon have so complex feature. After that we tried to research in it on EBM-7000, newly developed electron beam writer, and we found out the reduction of the image placement error caused by the resist charging effect on EBM-7000.

Citation Download Citation

Masato Saito, Kunihiro Ugajin, and Osamu Ikenaga "Reduction of resist charging effect by EB reticle writer EBM-7000", Proc. SPIE 7379, Photomask and Next-Generation Lithography Mask Technology XVI, 73791A (11 May 2009); https://doi.org/10.1117/12.824287

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE