Paper
6 August 2009 An accurate method for alignment of polarization-maintaining fiber with CCD micro-imaging system
Yan-jie Li, Rui Wang, Chun-xi Zhang, Yuan-hong Yang, De-wei Yang
Author Affiliations +
Abstract
Polarization-Maintaining(PM) optical fiber connector is widely used in various kinds of optic fiber sensors and communication equipments. The alignment of PM fiber polarization axis with the orientation key axis is one of the most important factors determining the extinction ratio of the connector. In order to ensure high accurate alignment of these two axises, CCD micro-imaging system is employed to take the cross-section image of Panda PM fiber, the edge points of stress rods are extracted by sub-pixel edge detection algorithm based on Hessian matrix. Consequently, the automatic detection of the polarization axis and the accurate calculation of the angle θ between the two axises are realized. Experiment results indicate that the method, combining CCD micro-imaging system and an accurate calculation of the angle θ, is effective to improve the alignment precision, which can reach ±0.5°. The work lays the foundation for realizing the auto-manufacture of PM optical fiber connector.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yan-jie Li, Rui Wang, Chun-xi Zhang, Yuan-hong Yang, and De-wei Yang "An accurate method for alignment of polarization-maintaining fiber with CCD micro-imaging system", Proc. SPIE 7384, International Symposium on Photoelectronic Detection and Imaging 2009: Advances in Imaging Detectors and Applications, 73841R (6 August 2009); https://doi.org/10.1117/12.835670
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Phase modulation

Charge-coupled devices

Detection and tracking algorithms

Connectors

Optical fibers

Anisotropic filtering

Back to Top