Paper
4 August 2009 Laser micromachining of transparent glass using ultrafast Bessel beams
Author Affiliations +
Proceedings Volume 7386, Photonics North 2009; 738632 (2009) https://doi.org/10.1117/12.839520
Event: Photonics North 2009, 2009, Quebec, Canada
Abstract
We fabricated optical waveguides in fused silica by focusing femtosecond laser pulses with an axicon. With this technique, we also produced microholes by using chemical etching. The axicon, which is a conical lens, generates an optical beam with a transverse intensity profile that follows a zero-order Bessel function. Bessel beams produced by axicon focusing have a narrow focal line of a few micron width which is invariant along a long distance (>1 cm). By focusing femtosecond pulses with an axicon into fused silica, we induced permanent modifications over the extented focal line of the axicon without scanning axially the glass sample. The waveguides so fabricated exhibit low losses and no detectable birefringence due their excellent circular symmetry. By translating the glass sample during the inscription process, we have fabricated planar waveguides. Microfluidic channels were obtained by soaking the exposed samples into a HF solution.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Véronique Zambon, Nathalie McCarthy, and Michel Piché "Laser micromachining of transparent glass using ultrafast Bessel beams", Proc. SPIE 7386, Photonics North 2009, 738632 (4 August 2009); https://doi.org/10.1117/12.839520
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Axicons

Waveguides

Bessel beams

Glasses

Femtosecond phenomena

Planar waveguides

Silica

Back to Top