The balloon ring: a high-performance low-cost instrumentation platform for measuring atmospheric turbulence profiles

Demos T. Kyrazis; Frank D. Eaton; Don G. Black; Wiley T. Black; Alastair Black

doi:10.1117/12.827540

12 August 2009 The balloon ring: a high-performance low-cost instrumentation platform for measuring atmospheric turbulence profiles

Demos T. Kyrazis, Frank D. Eaton, Don G. Black, Wiley T. Black, Alastair Black

Author Affiliations +

Proceedings Volume 7463, Atmospheric Optics: Models, Measurements, and Target-in-the-Loop Propagation III; 746308 (2009) https://doi.org/10.1117/12.827540
Event: SPIE Optical Engineering + Applications, 2009, San Diego, California, United States

Abstract

Balloons, similar to those used for meteorological observations, are commonly used to carry a small instrumentation package for measuring optical turbulence in the atmosphere as a function of altitude. Two temperature sensors, one meter apart, measure a single point of the temperature structure function. The raw data is processed to provided the value of C_T², and the results transmitted to a ground receiving site. These data are converted to the index of refraction structure constant, C_n². The validity of these measurements depend on the correctness of a number of assumptions. These include local isotropy of the turbulence and the existence of the Kolmogorov inertial subrange, and that the data is not contaminated by the wake of the ascending balloon. A variety of experiments on other platforms, and in the laboratory, demonstrate that the assumptions upon which these balloon measurements are made are not valid for a large percentage of the above described flights. In order to collect data whose interpretation did not require preconceived assumptions, the balloon ring instrumentation system was developed. The ring is 8.69 meters in diameter, with a cross-sectional diameter of 14 cm. The ring is hung just below the balloon, so that the wake goes through the center of the ring, and the sensors are mounted tangent to the circumference of the ring. The raw data is transmitted to the ground with a bandwidth extending to 1.25 kHz. A sample of the measurements taken during a flight at Vandenberg Air Force Base, Calif. is presented.

Citation Download Citation

Demos T. Kyrazis, Frank D. Eaton, Don G. Black, Wiley T. Black, and Alastair Black "The balloon ring: a high-performance low-cost instrumentation platform for measuring atmospheric turbulence profiles", Proc. SPIE 7463, Atmospheric Optics: Models, Measurements, and Target-in-the-Loop Propagation III, 746308 (12 August 2009); https://doi.org/10.1117/12.827540

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available