You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
27 May 2009Design verification for sub-70-nm DRAM nodes via metal fix using E-beam direct write
Because of mask cost reduction, electron beam direct write (EBDW) is implemented for special applications such as rapid prototyping or small volume production in semiconductor industry. One of the most promising applications for EBDW is design verification by means of metal fix. Due to write time constrains, Mix & Match solutions have to be developed at smaller nodes. This study reports on several Mix and Match processes for the integration of E-Beam lithography into the optical litho process flow of Qimonda's 70 nm and 58 nm DRAM nodes. Different metal layers have been patterned in part with DUV litho followed by E-Beam litho using a 50 kV Vistec SB3050 shaped electron beam direct writer. All hardmask patterns were then simultaneously transferred into the DRAM stack. After full chip processing a yield study comprising electrical device characterization and defect investigation was performed. We show detailed results including CD and OVL as well as improvements of the alignment mark recognition. The yield of the E-Beam processed chips was found to be within the range of wafer-to-wafer fluctuation of the POR hardware. We also report on metal fix by electrical cutting of selected diodes in large chip scales which usually cannot be accessed with FIB methods. In summary, we show the capability of EBDW for quick and flexible design verification.
The alert did not successfully save. Please try again later.
K. Keil, P. Jaschinsky, C. Hohle, K.-H. Choi, R. Schneider, M. Tesauro, F. Thrum, R. Zimmermann, J. Kretz, "Design verification for sub-70-nm DRAM nodes via metal fix using E-beam direct write," Proc. SPIE 7470, 25th European Mask and Lithography Conference, 747017 (27 May 2009); https://doi.org/10.1117/12.835206