Airborne measurements in the infrared using FTIR-based imaging hyperspectral sensors

E. Puckrin; C. S. Turcotte; P. Lahaie; D. Dubé; P. Lagueux; V. Farley; F. Marcotte; M. Chamberland

doi:10.1117/12.830972

30 September 2009 Airborne measurements in the infrared using FTIR-based imaging hyperspectral sensors

E. Puckrin, C. S. Turcotte, P. Lahaie, D. Dubé, P. Lagueux, V. Farley, F. Marcotte, M. Chamberland

Proceedings Volume 7482, Electro-Optical Remote Sensing, Photonic Technologies, and Applications III; 74820S (2009) https://doi.org/10.1117/12.830972
Event: SPIE Security + Defence, 2009, Berlin, Germany

Abstract

Hyperspectral ground mapping is being used in an ever-increasing extent for numerous applications in the military, geology and environmental fields. The different regions of the electromagnetic spectrum help produce information of differing nature. The visible, near-infrared and short-wave infrared radiation (400 nm to 2.5 μm) has been mostly used to analyze reflected solar light, while the mid-wave (3 to 5 μm) and long-wave (8 to 12 μm or thermal) infrared senses the self-emission of molecules directly, enabling the acquisition of data during night time. Push-broom dispersive sensors have been typically used for airborne hyperspectral mapping. However, extending the spectral range towards the mid-wave and long-wave infrared brings performance limitations due to the self emission of the sensor itself. The Fourier-transform spectrometer technology has been extensively used in the infrared spectral range due to its high transmittance as well as throughput and multiplex advantages, thereby reducing the sensor self-emission problem. Telops has developed the Hyper-Cam, a rugged and compact infrared hyperspectral imager. The Hyper-Cam is based on the Fourier-transform technology yielding high spectral resolution and enabling high accuracy radiometric calibration. It provides passive signature measurement capability, with up to 320x256 pixels at spectral resolutions of up to 0.25 cm-1. The Hyper-Cam has been used on the ground in several field campaigns, including the demonstration of standoff chemical agent detection. More recently, the Hyper-Cam has been integrated into an airplane to provide airborne measurement capabilities. A special pointing module was designed to compensate for airplane attitude and forward motion. To our knowledge, the Hyper-Cam is the first commercial airborne hyperspectral imaging sensor based on Fourier-transform infrared technology. The first airborne measurements and some preliminary performance criteria for the Hyper-Cam are presented in this paper.

Citation Download Citation

E. Puckrin, C. S. Turcotte, P. Lahaie, D. Dubé, P. Lagueux, V. Farley, F. Marcotte, and M. Chamberland "Airborne measurements in the infrared using FTIR-based imaging hyperspectral sensors", Proc. SPIE 7482, Electro-Optical Remote Sensing, Photonic Technologies, and Applications III, 74820S (30 September 2009); https://doi.org/10.1117/12.830972

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available