Paper
5 October 2009 A fiber-optic CT using a reflection type Sagnac coil and a time-delayed sampling demodulation
Author Affiliations +
Proceedings Volume 7503, 20th International Conference on Optical Fibre Sensors; 750338 (2009) https://doi.org/10.1117/12.835303
Event: 20th International Conference on Optical Fibre Sensors, 2009, Edinburgh, United Kingdom
Abstract
We propose a fiber-optic interferometric CT that uses a time-delayed sampling signal processing to extract the current-induced phase information. The interference signal of the reflection type Sagnac sensor coil is sampled with a carefully adjusted time delay. And the phase is extracted by using an arctangent demodulation. The accuracy comparison between the proposed and a lock-in amplifier demodulation showed the feasibility of the proposed technique. Also the outputs from a flint glass sensor coil and a standard fiber sensor coil were compared in the same condition, proving the low birefringence of the flint glass shows the better performance. The phase measurement accuracy of the proposed demodulation technique was about 8.09 mrad.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hyoung Jun Park, Hyun-Jin Kim, Yo Han Cho, and Minho Song "A fiber-optic CT using a reflection type Sagnac coil and a time-delayed sampling demodulation", Proc. SPIE 7503, 20th International Conference on Optical Fibre Sensors, 750338 (5 October 2009); https://doi.org/10.1117/12.835303
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Demodulation

Fiber optics

Sensors

Flint glass

Signal processing

Interferometry

Fiber optics sensors

Back to Top