Paper
28 December 2010 Analysis of the performance of multi-channel measurement system
Yu-wei Li, Ya Liu, Xiao-hui Li
Author Affiliations +
Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 754408 (2010) https://doi.org/10.1117/12.885393
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China
Abstract
Symmetricom's Multi-channel Measurement System (TSC MMS) is a phase measurement device based on the measurement principle of dual mixer time difference method (DMTD). TSC MMS is purchased by Time and Frequency measurement laboratory in National Time Service Center of Chinese Academy of Sciences. In order to evaluate the measurement capability of DMTD and research the improved method of performance, in this paper, the TSC MMS performance test platform is set up. We ensure the test signals have better stability than system, and the invariant environment to reduce the effect of measurement produced by external environment as much as possible. Under the same condition, three-day data are collected to measure the noise floor of a system. Finally, we analyze the reasons attributing to the measurement results and proposed a improving method in detail. The measured results demonstrate that the Allan deviation stability will reach 3E-13 per second when the frequency of the input signals is 10MHz.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu-wei Li, Ya Liu, and Xiao-hui Li "Analysis of the performance of multi-channel measurement system", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 754408 (28 December 2010); https://doi.org/10.1117/12.885393
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Clocks

Phase measurement

Oscillators

Signal attenuation

Time metrology

Cesium

Computer networks

Back to Top