Toward characterizing the size of microscopic optical absorbers using optoacoustic emission spectroscopy

A. G. Gertsch; N. L. Bush; D. C. C. Birtill; J. C. Bamber

doi:10.1117/12.844188

23 February 2010 Toward characterizing the size of microscopic optical absorbers using optoacoustic emission spectroscopy

A. G. Gertsch, N. L. Bush, D. C. C. Birtill, J. C. Bamber

Author Affiliations +

Proceedings Volume 7564, Photons Plus Ultrasound: Imaging and Sensing 2010; 75641M (2010) https://doi.org/10.1117/12.844188
Event: SPIE BiOS, 2010, San Francisco, California, United States

Abstract

To assess the malignancy and progression of a tumour, parameters such as the size and number density of the microvessels are expected to be important. The optical absorption due to the blood that fills the microvessels can be visualised by optoacoustic imaging (OA). We have previously reported that increasing the inhomogeneity of absorption within a large absorbing volume produces evidence of reduced acoustic coherence which results in improved contrast and boundary detectability. Here we propose to take advantage of the expectation that the detailed nature of the inhomogeneity should influence the frequency spectrum of the OA signal. The overall aim of this work is to determine whether an analysis of the frequency spectrum of the emitted optoacoustic signal can be used to determine the scale of this absorption inhomogeneity, in particular parameters such as the characteristic size and separation of the absorbers (microvessels). In the preliminary study reported here, various gelatine-intralipid phantoms containing cylindrical wallless tubes filled with an ink solution were measured in water with a linear array ultrasound detector, using pulsedillumination that had been adjusted for an optimal distribution of light fluence with depth. Simulations of the experiments were also conducted, using a time domain acoustic propagation method. The results confirm that optoacoustic signals bear information on the sizes and distribution of the absorbers in their frequency spectra. It is shown that a simple way to determine the diameter of a single cylindrical absorber is to estimate the quefrency of the peak in the cepstrum of the measured signal. Further work is proposed to extend this to the statistical estimation of mean diameter and mean separation for an ensemble of similar absorbers and to absorbers with a diameter that is smaller than the axial resolution of the acoustic receiver.

Citation Download Citation

A. G. Gertsch, N. L. Bush, D. C. C. Birtill, and J. C. Bamber "Toward characterizing the size of microscopic optical absorbers using optoacoustic emission spectroscopy", Proc. SPIE 7564, Photons Plus Ultrasound: Imaging and Sensing 2010, 75641M (23 February 2010); https://doi.org/10.1117/12.844188

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE