Head and body CTDIw of dual-energy x-ray CT with fast-kVp switching

Baojun Li; Girijesh Yadava; Jiang Hsieh; Naveen Chandra; Mary Sue Kulpins

doi:10.1117/12.844314

22 March 2010 Head and body CTDI_w of dual-energy x-ray CT with fast-kVp switching

Baojun Li, Girijesh Yadava, Jiang Hsieh, Naveen Chandra, Mary Sue Kulpins

Author Affiliations +

Proceedings Volume 7622, Medical Imaging 2010: Physics of Medical Imaging; 76221Y (2010) https://doi.org/10.1117/12.844314
Event: SPIE Medical Imaging, 2010, San Diego, California, United States

Abstract

Dual-energy CT has attracted much attention in recent years. Most recently, a fast-kVp switching (FKS) dual-energy method has been presented with clinical and phantom results to demonstrate its efficacy. The purpose of our study was to quantitatively compare the CTDIW of FKS and routine CT exams under the body and head conditions. For a fair comparison, the low contrast detectability (LCD) was matched before measuring dose. In FKS protocols, an x-ray generator switch rapidly between 140kVp and 80kVp in adjacent views, and the effective tube current is around 600mA. In addition to the tube voltage and current, the flux ratio between high and low kVp is optimized by asymmetric sampling of 35%-65%. The head and body protocols further differ by the gantry speed (0.9sec/1.0sec) and type of bowtie filter (head/body). For baseline single-energy, we followed the IEC standard head and body protocols (120kV, 1sec, 5mm) but iteratively adjusted the tube current (mA) in order to match the LCD. CTDIW was measured using either a 16 cm (for head scanning) or a 32 cm (for body scanning) PMMA phantom of at least 14 cm in length. The LCD was measured using the water section of Catphan 600. To make the study repeatable, the automated statistical LCD measurement tool available on GE Discovery CT750 scanner was used in this work. The mean CTDIW for the head and body single-energy acquisitions were 57.5mGy and 29.2mGy, respectively. The LCD was measured at 0.45% and 0.42% (slice thickness=5mm, object size=3mm, central 4 images), respectively. The average CTDIW for FKS head and body scans was 70.4mGy and 33.4mGy, respectively, at the optimal monochromatic energy of 65 keV. The corresponding LCD was measured at 0.45% and 0.43%, respectively. This demonstrates that, with matching LCD, CTDIW of FKS is comparable to that of routine CT exams under head and body conditions.

Citation Download Citation

Baojun Li, Girijesh Yadava, Jiang Hsieh, Naveen Chandra, and Mary Sue Kulpins "Head and body CTDI_w of dual-energy x-ray CT with fast-kVp switching", Proc. SPIE 7622, Medical Imaging 2010: Physics of Medical Imaging, 76221Y (22 March 2010); https://doi.org/10.1117/12.844314

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE