Mask data rank and printability verification function of mask inspection system

Kenichi Takahara; Masakazu Tokita; Hideo Tsuchiya; Masaki Yamabe; Nobutaka Kikuiri; Kinya Usuda

doi:10.1117/12.846412

15 April 2010 Mask data rank and printability verification function of mask inspection system

Kenichi Takahara, Masakazu Tokita, Hideo Tsuchiya, Masaki Yamabe, Nobutaka Kikuiri, Kinya Usuda

Proceedings Volume 7638, Metrology, Inspection, and Process Control for Microlithography XXIV; 763833 (2010) https://doi.org/10.1117/12.846412
Event: SPIE Advanced Lithography, 2010, San Jose, California, United States

Abstract

With continued shrinkage of the semiconductor technology node, the inspection of mask with a single preset defect detection sensitivity level becomes impractical because of the increase occurrence of false capturing of defects. Inspection of leading-edge masks with conventional defect detection method, redundant detection of defects such as pseudo defects, or anomalies such as slightly deformed OPCs caused by assist features tend to increase the Turn Around Time (TAT) and cost of ownership (COO). This report describes a new method for the inspection of mask. It assigns defect detection sensitivity levels to local area inspections and is named as Regional Sensitivity Applied Inspection (RSAI). Then, the sensitivity information from each local area is converted into a format that can be fed into a Mask Data Rank (MDR) which is represented on the basis of pattern prioritization determined at the device design stage. Core technologies employing this concept resulted in the shortening of TAT where samples of actual device mask patterns were used. Printability verification functions (PVF) were applied to the advancement of technologies such as to Source Mask Optimization (SMO) technology. We report on the shortening of TAT that was achieved by the implementation of a new inspection technology that combines RSAI with MDR, and employs printability verification functions.

Citation Download Citation

Kenichi Takahara, Masakazu Tokita, Hideo Tsuchiya, Masaki Yamabe, Nobutaka Kikuiri, and Kinya Usuda "Mask data rank and printability verification function of mask inspection system", Proc. SPIE 7638, Metrology, Inspection, and Process Control for Microlithography XXIV, 763833 (15 April 2010); https://doi.org/10.1117/12.846412

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available