Translator Disclaimer
30 March 2010 Investigation of sodium-potassium niobate (Na0.5K0.5NbO3) thin film fabrication for piezoelectric sensor application
Author Affiliations +
Piezoelectricity is one major actuating mechanism of cellulose Electro-active paper (EAPap). In order to enhance piezoelectric performance of cellulose, thin piezoelectric sodium-potassium niobate, Na0.5K0.5NbO3(NKN), film on cellulose, silicon and glass substrates was deposited by magnetron sputtering method. As grown NKN layer on different substrates was characterized by XRD, AFM and electrical measurements. By increasing the RF power, crystal structures were observed from the NKN films on silicon and glass substrate, while no peak was observed from cellulose due to microcracks of films. The detail structural and electrical observation was discussed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sang-Dong Jang, Jung-Hyuk Koh, Joo-Hyung Kim, and Jaehwan Kim "Investigation of sodium-potassium niobate (Na0.5K0.5NbO3) thin film fabrication for piezoelectric sensor application", Proc. SPIE 7646, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2010, 76460E (30 March 2010);


PZT piezoelectric films on glass for Gen-X imaging
Proceedings of SPIE (August 27 2010)
Wafer bonding with an adhesive coating
Proceedings of SPIE (September 08 1998)
Micromechanical cantilevers and scanning probe microscopes
Proceedings of SPIE (September 26 1995)
Formation of hollow glass microcylinders of silica
Proceedings of SPIE (January 02 1998)
Effects of Ti addiction in WO3 thin film ammonia gas...
Proceedings of SPIE (October 28 2006)

Back to Top