Paper
8 September 2010 H2 sensing performance of optical fibers coated with WO3 film
Author Affiliations +
Proceedings Volume 7653, Fourth European Workshop on Optical Fibre Sensors; 76530N (2010) https://doi.org/10.1117/12.866420
Event: (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 2010, Porto, Portugal
Abstract
Optical gas sensing performance of optical fibers coated with sputtered Pd/WO3 films was investigated for low concentration H2 sensing. This optical fiber H2 sensor was prepared by RF sputtering of WO3 on the tip of the multimode fiber at 260°C and subsequently depositing a Pd catalytic layer. Highly uniform nanotextured film, with individual crystallites having diameters in the range of 35-50 nm was observed. The sensing mechanism was based on the reflectance change of Pd/WO3 layers towards H2 reliant on the gasochromic effect. Under the conditions of different sensing layer thicknesses and different operating temperatures, full Vis-NIR spectra investigations were carried out during the sensor testing. It was found that the optical fiber H2 sensor coated with Pd/WO3 film show a remarkable optical reflectance response towards H2 concentrations as low as 0.06%. The optimum sensing layer thickness was 200 nm and the optimum operating temperature was found to be 100°C.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Ou, M. H. Yaacob, M. Breedon, K. Kalantar-Zadeh, and W. Wlodarski "H2 sensing performance of optical fibers coated with WO3 film", Proc. SPIE 7653, Fourth European Workshop on Optical Fibre Sensors, 76530N (8 September 2010); https://doi.org/10.1117/12.866420
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Reflectivity

Sensors

Optical sensing

Sputter deposition

Palladium

Fiber optics sensors

RELATED CONTENT


Back to Top