Paper
6 October 2010 Design and simulation of the LGP structure for LED backlight
Wei Zhang, Hong Wang, Lingling Ji, Chuanfang Liu
Author Affiliations +
Proceedings Volume 7655, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 765537 (2010) https://doi.org/10.1117/12.866740
Event: 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2010, Dalian, China
Abstract
The efficiencies and uniformities of the backlight are mostly determined by the light guide plate which is an important component of the edge-lighting LED backlight. The optical properties of the LED for most of LGP (Light Guide Plate) design model had been neglected, and multi-layer optical films had been used. In this paper the trans-mission process of light-beam within edge-lighting LGP has been analysis with an intensity distribution model of multi-LED to derive the rule of netted dots arrangement. A formula of dots arrangement and the design method were obtained. Then the edge-ray theorem was used for micro-prism which is on top surface design. At last the optical simulation software was used for simulation and analysis, we compared with other design methods and the results show that this structure can easily eliminate the phenomenon that the brightness uniformity of the place near the source is not high, at the same time it can effectively reduce the number of prism film in maintaining the brightness of the LED backlight and Simplified the structure.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Zhang, Hong Wang, Lingling Ji, and Chuanfang Liu "Design and simulation of the LGP structure for LED backlight", Proc. SPIE 7655, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 765537 (6 October 2010); https://doi.org/10.1117/12.866740
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

LED backlight

Light emitting diodes

Waveguides

Light scattering

3D modeling

LCDs

RELATED CONTENT

Diffuser array for a light-emitting diode backlight system
Proceedings of SPIE (September 18 2007)
A study of LED light linear device for light guide...
Proceedings of SPIE (September 21 2007)
A kind of side emitting LED backlight light guide panel...
Proceedings of SPIE (November 15 2010)
Planar lighting by blue LEDs array with remote phosphor
Proceedings of SPIE (February 11 2010)

Back to Top