Paper
3 May 2010 Mid-infrared backscattering measurements of building materials using a quantum cascade laser
Author Affiliations +
Abstract
Open-path quantum cascade laser (QCL) systems are being developed for remote environmental monitoring applications for detection of small levels of toxins or pollutant gases in ambient air. In monostatic systems that rely on topographic backscatter, the surface reflection of the target becomes important. To address the feasibility of natural targets in an open-path geometry, we present the backscattering measurements of common urban building materials (aluminum, natural stones, ceramic wall tiles and concrete block) using a distributed feedback (DFB) pulsed QCL. Real surface roughness in the materials was taken into account. In particular, oblique scattering cases which are often unavoidable in field measurements were also investigated. The QCL measurements were evaluated with a FTIR system in which wide frequency range (2.8μm - 25μm) measurements were possible. These results were applied to a total link model to define the potential and range of an open path QCL chemical sensor system.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Maung Lwin, Paul Corrigan, Barry Gross, Fred Moshary, and Samir Ahmed "Mid-infrared backscattering measurements of building materials using a quantum cascade laser", Proc. SPIE 7660, Infrared Technology and Applications XXXVI, 766043 (3 May 2010); https://doi.org/10.1117/12.852679
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum cascade lasers

Reflectivity

Backscatter

FT-IR spectroscopy

Aluminum

Ceramics

Polishing

Back to Top