Semi-fuel cell studies for powering underwater devices: integrated design for maximized net power output

Andres M. Cardenas-Valencia; R. Timothy Short; Lori Adornato; Larry Langebrake

doi:10.1117/12.853329

Translator Disclaimer

7 May 2010 Semi-fuel cell studies for powering underwater devices: integrated design for maximized net power output

Andres M. Cardenas-Valencia, R. Timothy Short, Lori Adornato, Larry Langebrake

Author Affiliations +

Proceedings Volume 7693, Unattended Ground, Sea, and Air Sensor Technologies and Applications XII; 76930Y (2010) https://doi.org/10.1117/12.853329
Event: SPIE Defense, Security, and Sensing, 2010, Orlando, Florida, United States

Abstract

Use of sensor systems in water bodies has applications that range from environmental and oceanographic research to port and homeland security. Power sources are often the limiting component for further reduction of sensor system size and weight. We present recent investigations of metal-anode water-activated galvanic cells, specifically water-activated Alcells using inorganic alkali peroxides and solid organic oxidizers (heterocyclic halamines), in a semi-fuel cell configuration (i.e., with cathode species generated in situ and flow-through cells). The oxidizers utilized are inexpensive solid materials that are generally (1) safer to handle than liquid solutions or gases, (2) have inherently higher current and energy capacity (as they are not dissolved), and, (3) if appropriately packaged, will not degrade over time. The specific energy (S.E.) of Al-alkali peroxide was found to be 230 Wh/kg (460 Wh/kg, considering only active materials) in a seven-gram cell. Interestingly, when the cell size was increased (making more area of the catalytic cathode electrode available), the results from a single addition of water in an Al-organic oxidizer cell (weighing ~18 grams) showed an S.E. of about 200 Wh/kg. This scalability characteristic suggests that values in excess of 400 Wh/kg could be obtained in a semi-fuel-cell-like system. In this paper, we also present design considerations that take into account the energy requirements of the pumping devices and show that the proposed oxidizers, and the possible control of the chemical equilibrium of these cathodes in solution, may help reduce this power requirement and hence enhance the overall energetic balance.

Citation Download Citation

Andres M. Cardenas-Valencia, R. Timothy Short, Lori Adornato, and Larry Langebrake "Semi-fuel cell studies for powering underwater devices: integrated design for maximized net power output", Proc. SPIE 7693, Unattended Ground, Sea, and Air Sensor Technologies and Applications XII, 76930Y (7 May 2010); https://doi.org/10.1117/12.853329

ACCESS THE FULL ARTICLE