Paper
1 January 1987 Dry Development With Reactive Ion Etching (RIE) And Magnetron Enhanced Etching (MIE) Technology
F. Coopmans, G. Brassuer, B. Roland, R. Lombaerts, S. Till
Author Affiliations +
Abstract
Two dry etch technologies are compared for application in dry development of resist. All results are obtained using the DESIRE [1,2] process. We show that MIE and RIE can give good results. Experiments were performed using a planar reactor and a hexode reactor in reactive ion etching mode. Although the develop rate is about ten times slower in the hexode reactor, selectivity and image quality is comparable to the planar reactor. Using magnetron assisted etching very high etchrates up to 3 μm/min can be obtained, but the etchrate is flowrate limited. The selectivity can be higher than in the pure RIE set-up but optimisition of the image does not require very high selectivity. The effect of the develop conditions on the lithographic contrast of the resist system are discussed. The contrast can be varied between 2 and 5 by changing these conditions.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Coopmans, G. Brassuer, B. Roland, R. Lombaerts, and S. Till "Dry Development With Reactive Ion Etching (RIE) And Magnetron Enhanced Etching (MIE) Technology", Proc. SPIE 0772, Optical Microlithography VI, (1 January 1987); https://doi.org/10.1117/12.967045
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Reactive ion etching

Oxygen

Lithography

Silicon

Optical lithography

Dry etching

RELATED CONTENT


Back to Top