Translator Disclaimer
19 July 2010 M1 and M2 mirror manufacturing for ARIES project: current status
Author Affiliations +
JSC LZOS under the contract with firm AMOS is carrying out the manufacturing works of Primary and Secondary Mirrors of Devasthal Optical Telescope (DOT) for Aryabhatta Research Institute of Observational Sciences (ARIES). Primary mirror specifications: diameter is 3700 mm, vertex radius is 14639 mm (F/1.96), conical constant is -1.03296, asphericity is 111 microns. Secondary mirror specifications: diameter is 980 mm, vertex radius is 4675 mm (F/1.78), conical constant is -2.79561, asphericity is 47 microns. The current progress status under this project is presented here in the manuscript.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander P. Semenov, Magomed A. Abdulkadyrov, Alexey P. Patrikeev, Vladimir E. Patrikeev, and Vitaliy V. Pridnya "M1 and M2 mirror manufacturing for ARIES project: current status", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 773907 (19 July 2010);


Interference test procedures for telescopic mirrors
Proceedings of SPIE (February 26 2004)
M2 secondary mirror manufacturing for VISTA project
Proceedings of SPIE (July 23 2008)
Manufacturing of the 1070mm F/1.5 ellipsoid mirror
Proceedings of SPIE (May 20 2009)
Fabrication and measured quality of the MMT primary mirror
Proceedings of SPIE (August 25 1998)
GRANTECAN telescope M3 mirror manufacturing
Proceedings of SPIE (September 24 2004)

Back to Top