A 700 GHz unilateral finline SIS mixer fed by a multi-flare angle smooth-walled horn

Boon-Kok Tan; Ghassan Yassin; Paul Grimes; Jamie Leech; Karl Jacobs; Stafford Withington; Mike Tacon; Christopher Groppi

doi:10.1117/12.856711

15 July 2010 A 700 GHz unilateral finline SIS mixer fed by a multi-flare angle smooth-walled horn

Boon-Kok Tan, Ghassan Yassin, Paul Grimes, Jamie Leech, Karl Jacobs, Stafford Withington, Mike Tacon, Christopher Groppi

Author Affiliations +

Proceedings Volume 7741, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V; 774110 (2010) https://doi.org/10.1117/12.856711
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

We present the design of a broadband superconductor-insulator-superconductor (SIS) mixer operating near 700 GHz. A key feature of our design is the utilisation of a new type of waveguide to planar circuit transition comprising a unilateral finline taper. This transition is markedly easier to design, simulate and fabricate than the antipodal finline we employed previously. The finline taper and the superconducting circuitry are deposited on a 15 μm thick silicon substrate. The employment of the very thin substrate, achieved using Silicon-On-Insulator (SOI) technology, makes it easy to match the incoming signal to the loaded waveguide. The lightweight mixer chip is held in the E-plane of the waveguide using gold beam leads, avoiding the need for deep grooves in the waveguide wall. This new design yields a significantly shorter chip, free of serrations and a wider RF bandwidth. Since tuning and all other circuits are integrated on the mixer chip, the mixer block is extremely simple, comprising a feed horn and a waveguide section without any complicated mechanical features. We employ a new type of smooth-walled horn which exhibits excellent beam circularity and low cross polarisation, comparable to the conventional corrugated horn, and yet is easier to fabricate. The horn is machined by standard milling with a drill tool shaped into the horn profile. In this paper, we describe the detailed design of the mixer chip including electromagnetic simulations, and the mixer performance obtained with SuperMix simulations. We also present the preliminary measurements of the smooth-walled horn radiation patterns near the mixer operating frequencies.

Citation Download Citation

Boon-Kok Tan, Ghassan Yassin, Paul Grimes, Jamie Leech, Karl Jacobs, Stafford Withington, Mike Tacon, and Christopher Groppi "A 700 GHz unilateral finline SIS mixer fed by a multi-flare angle smooth-walled horn", Proc. SPIE 7741, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V, 774110 (15 July 2010); https://doi.org/10.1117/12.856711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available