PSF and MTF measurement methods for thick CCD sensor characterization

P. Z. Takacs; I. Kotov; J. Frank; P. O'Connor; V. Radeka; D. M. Lawrence

doi:10.1117/12.856738

2 July 2010 PSF and MTF measurement methods for thick CCD sensor characterization

P. Z. Takacs, I. Kotov, J. Frank, P. O'Connor, V. Radeka, D. M. Lawrence

Proceedings Volume 7742, High Energy, Optical, and Infrared Detectors for Astronomy IV; 774207 (2010) https://doi.org/10.1117/12.856738
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

Knowledge of the point spread function (PSF) of the sensors to be used in the Large Synoptic Survey Telescope (LSST) camera is essential for optimal extraction of subtle galaxy shape distortions caused by gravitational weak lensing. We have developed a number of techniques for measuring the PSF of candidate CCD sensors to be used in the LSST camera, each with its own strengths and weaknesses. The two main optical PSF measurement techniques that we use are the direct Virtual Knife Edge (VKE) scan as developed by Karcher, et al.¹ and the indirect interference fringe method after Andersen and Sorensen² that measures the modulation transfer function (MTF) directly. The PSF is derived from the MTF by Fourier transform. Other non-optical PSF measurement techniques that we employ include ⁵⁵Fe x-ray cluster image size measurements and statistical distribution analysis, and cosmic ray muon track size measurements, but are not addressed here. The VKE technique utilizes a diffraction-limited spot produced by a Point-Projection Microscope (PPM) that is scanned across the sensor with sub-pixel resolution. This technique closely simulates the actual operating condition of the sensor in the telescope with the source spot size having an f/# close to the actual telescope design value. The interference fringe method uses a simple equal-optical-path Michelson-type interferometer with a single-mode fiber source that produces interference fringes with 100% contrast over a wide spatial frequency range sufficient to measure the MTF of the sensor directly. The merits of each measurement technique and results from the various measurement techniques on prototype LSST sensors are presented and compared.

Citation Download Citation

P. Z. Takacs, I. Kotov, J. Frank, P. O'Connor, V. Radeka, and D. M. Lawrence "PSF and MTF measurement methods for thick CCD sensor characterization", Proc. SPIE 7742, High Energy, Optical, and Infrared Detectors for Astronomy IV, 774207 (2 July 2010); https://doi.org/10.1117/12.856738

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available