Optical air temperature and density measurement system for aircraft using elastic and Raman backscattering of laser light

Michael Fraczek; Andreas Behrendt; Nikolaus Schmitt

doi:10.1117/12.865541

20 October 2010 Optical air temperature and density measurement system for aircraft using elastic and Raman backscattering of laser light

Michael Fraczek, Andreas Behrendt, Nikolaus Schmitt

Author Affiliations +

Proceedings Volume 7835, Electro-Optical Remote Sensing, Photonic Technologies, and Applications IV; 78350D (2010) https://doi.org/10.1117/12.865541
Event: SPIE Security + Defence, 2010, Toulouse, France

Abstract

A novel concept of an optical system for remote temperature and density measurements from aircraft is presented. The system shall monitor local air data being critical for aircraft control. The measurement method overcomes the drawbacks of conventional probes, which is mainly the vulnerability to mechanical damage caused in harsh weather conditions or e.g. by volcanic ash. The measurement system is based on LIDAR technology used to extract air temperature and density information out of the elastic and Raman backscatter, generated by scattering of a laser beam from air molecules and airborne particles. Four optimized interference filters constitute the core of the four measurement channels. The measurement method, the setup of a prototype, and first results of laboratory test measurements with a single laser pulse energy of 145 mJ at a wavelength of 532 nm are presented. The results confirm our simulations of the expected system performance. With regard to temperature measurements, the measurement precisions with current experimental settings like the central wavelengths of the rotational Raman interference filters amount 0.7 K at 1000 hPa to 2.9 K at 165 hPa for one pulse detection and 0.25 K at 1000 hPa to 1.1 K at 165 hPa for an average over 10 pulses (equal to 1 s measurement time). With regard to density measurements the corresponding errors are ranging from 0.4 % (1000 hPa) to 1.5 % (165 hPa) for one pulse detection and from 0.15 % (1000 hPa) to 0.6 % (165 hPa) for an average over 10 pulses. Further optimization is expected to reduce the required laser power and improve the precision further.

Citation Download Citation

Michael Fraczek, Andreas Behrendt, and Nikolaus Schmitt "Optical air temperature and density measurement system for aircraft using elastic and Raman backscattering of laser light", Proc. SPIE 7835, Electro-Optical Remote Sensing, Photonic Technologies, and Applications IV, 78350D (20 October 2010); https://doi.org/10.1117/12.865541

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available