Paper
5 November 2010 Carrier feed-through analysis of heterodyne lidar system
Jiqiang Wang, Zhiqiang Song, Chang Wang, Tongyu Liu, Jiasheng Ni
Author Affiliations +
Abstract
A novel heterodyne continuous wave lidar system based on single-mode fiber (SMF) components and instruments is reported. In order to improve the signal-to-noise ratio (SNR) of heterodyne lidar system, the four causes producing carrier feed-through are presented, including: (1) the return loss of optical antenna; (2) the direction of fiber circulator; (3) the extinction ratio of acousto-optic frequency shifter (AOFS); (4) close object's reflection. Then theoretical analysis and experimental study for the methods of eliminating carrier feed-through are conducted. The results demonstrate that carrier feed-through mainly arises from the non-ideality of optical components. By improving the traditional heterodyne optical structure and enhancing the performance of optical components, the carrier feed-through power can be decreased by more than 20dB.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiqiang Wang, Zhiqiang Song, Chang Wang, Tongyu Liu, and Jiasheng Ni "Carrier feed-through analysis of heterodyne lidar system", Proc. SPIE 7849, Optical Design and Testing IV, 78490S (5 November 2010); https://doi.org/10.1117/12.869902
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Signal detection

Heterodyning

Optical antennas

Signal attenuation

Sensors

Oscillators

Back to Top