Translator Disclaimer
Paper
9 November 2010 Signal processing and correction implementation for modulation transfer function test bench
Author Affiliations +
Abstract
The signal processing flow for the MTF test bench that is based on Fourier analysis method is presented. The signal processing flow mainly consists of three parts that are Fourier analyzing, background correction and system attenuation elimination. The center of the pinhole area is recognized automatically and the line spread functions (LSF) of both sagittal and tangential directions are calculated. Second-order fast Fourier transform is executed so that a primary two-direction MTF result is gained. Either auto Fourier-domain background correction or manual time-domain background correction is executed. The attenuation of the tested MTF result due to the influence of the detector and pinhole is eliminated finally. A commercially available 50-mm plano-convex audit lens is tested as the sample to validate the accuracy of the signal processing flow of the MTF test bench. The test error is below 0.01 under 200lp/mm.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuheng Chen, Xinhua Chen, Chunchang Xiang, and Weimin Shen "Signal processing and correction implementation for modulation transfer function test bench", Proc. SPIE 7850, Optoelectronic Imaging and Multimedia Technology, 78501P (9 November 2010); https://doi.org/10.1117/12.870058
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

IASI: instrument overview
Proceedings of SPIE (September 29 1995)
MTF measurement technique for GOES imager
Proceedings of SPIE (August 26 1998)
Development of a real time MTF test bench for visible...
Proceedings of SPIE (November 09 2010)

Back to Top