Paper
18 February 2011 Simulating the spatially-dependent frequency response of arbitraryshape acoustic detectors for optoacoustic imaging
Author Affiliations +
Abstract
One of the major challenges of optoacoustic imaging is that it involves relatively weak acoustic signals, which need to be detected with high signal-to-noise ratio (SNR). Because the SNR is generally proportional to the area of the detector's face, large detectors are commonly used. Although the use of such detectors improves the SNR, it may lead to significant signal distortion resulting in artifacts in the reconstructed optoacoustic image. In this work we developed a method for simulating the spatially dependent frequency response of acoustic detectors with arbitrary surface shapes. The frequency response is incorporated into a forward model for optoacoustic propagation. Our method can be used for designing detectors with desired properties and reducing reconstruction artifacts caused by the response of finite-size detectors.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amir Rosenthal, Vasilis Ntziachristos, and Daniel Razansky "Simulating the spatially-dependent frequency response of arbitraryshape acoustic detectors for optoacoustic imaging", Proc. SPIE 7899, Photons Plus Ultrasound: Imaging and Sensing 2011, 78992S (18 February 2011); https://doi.org/10.1117/12.874082
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Acoustics

Signal detection

Convolution

Detection and tracking algorithms

Signal to noise ratio

Image sensors

RELATED CONTENT


Back to Top