Addressing challenges in lithography using sub-millisecond post exposure bake of chemically amplified resists

Byungki Jung; Christopher K. Ober; Michael O. Thompson; Todd R. Younkin; Manish Chandhok

doi:10.1117/12.879288

15 April 2011 Addressing challenges in lithography using sub-millisecond post exposure bake of chemically amplified resists

Byungki Jung, Christopher K. Ober, Michael O. Thompson, Todd R. Younkin, Manish Chandhok

Author Affiliations +

Proceedings Volume 7972, Advances in Resist Materials and Processing Technology XXVIII; 797219 (2011) https://doi.org/10.1117/12.879288
Event: SPIE Advanced Lithography, 2011, San Jose, California, United States

Abstract

Chemically amplified photoresists require a post exposure bake (PEB), typically on a hot plate at 90-150°C for 30-120 seconds, to catalytically deprotect the polymer backbone. During PEB, excessive diffusion of the photo-generated acid results in loss of line edge definition, blurring of latent images and changes in the line edge roughness. Both acid diffusion and deprotection are thermally activated processes, with the relative rates affected by the time/temperature profile of the PEB. In this work, we introduce an alternate PEB method involving millisecond time frame heating over a temperature range of 300°C to 420°C using a continuous wave CO₂ laser. A methodology is developed for characterizing the resist deprotection and acid diffusion kinetics under laser PEB (l-PEB) and comparing the behavior with conventional hot plate PEB. Results show that the deprotection rate sensitivity with temperature is smaller for l-PEB compared to that of hot plate PEB, suggesting a possible change in the deprotection mechanism. Acid diffusivity under l-PEB is reduced by a factor of 10²-10³ compared to values extrapolated from the hot plate PEB data. Under EUV exposure, patterns formed using l-PEB show significantly smoother surface roughness while requiring less than half the dose required for hot plate PEB - a direct consequence of enhanced deprotection at high PEB temperature and reduced acid diffusion in the millisecond time frame.

Citation Download Citation

Byungki Jung, Christopher K. Ober, Michael O. Thompson, Todd R. Younkin, and Manish Chandhok "Addressing challenges in lithography using sub-millisecond post exposure bake of chemically amplified resists", Proc. SPIE 7972, Advances in Resist Materials and Processing Technology XXVIII, 797219 (15 April 2011); https://doi.org/10.1117/12.879288

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available