Design, fabrication, and testing of contact-aided compliant cellular mechanisms with curved walls

Samantha A. Cirone; Gregory R. Hayes; Brian L. Babcox; Mary Frecker; James H. Adair; George A. Lesieutre

doi:10.1117/12.880529

27 April 2011 Design, fabrication, and testing of contact-aided compliant cellular mechanisms with curved walls

Samantha A. Cirone, Gregory R. Hayes, Brian L. Babcox, Mary Frecker, James H. Adair, George A. Lesieutre

Proceedings Volume 7977, Active and Passive Smart Structures and Integrated Systems 2011; 79771F (2011) https://doi.org/10.1117/12.880529
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

Contact-Aided Compliant Cellular Mechanisms (C³M) are compliant cellular structures with integrated contact mechanisms. The focus of the paper is on the design, fabrication, and testing of C³M with curved walls for high strain applications. It is shown that global strains were increased by replacing straight walls with curved walls in the traditional honeycomb structure, while the addition of contact mechanisms increased cell performance via stress relief in some cases. Furthermore, curved walls are beneficial for fabrication at the meso-scale. The basic curved honeycomb cell geometry is defined by a set of variables. These variables were optimized using Matlab and finite element analysis to find the best non-contact and contact-aided curved cell geometries as well as the cell geometry that provides the greatest stress relief. Currently, the most effective contact-aided curved honeycomb cell can withstand global strains approximately 160% greater than the most effective contact-aided, non-curved cell. Four different designs were fabricated via the Lost Mold-Rapid Infiltration Forming (LM-RIF) process. An array of the contact-aided optimized curved cell was then mechanically tested using a custom designed test rig, and the results were found to have a higher modulus of elasticity and lower global strain than the predictions. Despite these discrepancies, a high-strength highstrain cellular structure was developed, for potential use in morphing aircraft applications.

Citation Download Citation

Samantha A. Cirone, Gregory R. Hayes, Brian L. Babcox, Mary Frecker, James H. Adair, and George A. Lesieutre "Design, fabrication, and testing of contact-aided compliant cellular mechanisms with curved walls", Proc. SPIE 7977, Active and Passive Smart Structures and Integrated Systems 2011, 79771F (27 April 2011); https://doi.org/10.1117/12.880529

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available