Thickness effects in electroactive polymers actuators: a simple explanation and modeling

K. Yuse; D. Guyomar; M. Kanda

doi:10.1117/12.880754

31 March 2011 Thickness effects in electroactive polymers actuators: a simple explanation and modeling

K. Yuse, D. Guyomar, M. Kanda

Proceedings Volume 7984, Health Monitoring of Structural and Biological Systems 2011; 79841M (2011) https://doi.org/10.1117/12.880754
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

For practical use, the electrical field requirements of Electro Active Polymer (EAP) actuators have to be lowered down. Recently, we developed nano carbon filled polymeric films which can generate a large strain (30-50%) at moderate electrical field (less than 20 MV/m). Herein, the electrostrictive strain saturates versus electrical field and that the maximum strain depends strongly on the sample thickness. Combining polarization saturation effect and heterogeneities in the polymer thickness lead to a model that describes correctly the strain behavior versus electrical field, polymer thickness and frequency. A three-layer model was established which assumes that the polymer is not homogeneous along the thickness. Two outer and one inner layers exist, which must be formed during the polymer curing. It is considered that these layers have slightly different characteristics, such as permittivity. When the electrical field is input parallel to the polymer thickness, a different strain would take place in each layer according to the field distribution. Since the layers are attached together, the strain must be the same in each layer. Consequently stresses appear in the different layers. Introducing in this model a saturation of the polarization for high field leads to simulation results that fit well the experimental data.

Citation Download Citation

K. Yuse, D. Guyomar, and M. Kanda "Thickness effects in electroactive polymers actuators: a simple explanation and modeling", Proc. SPIE 7984, Health Monitoring of Structural and Biological Systems 2011, 79841M (31 March 2011); https://doi.org/10.1117/12.880754

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available