Paper
18 April 2011 Lamb wave based detection of damage in a stiffener bonded to a plate
Author Affiliations +
Abstract
Stiffener is one of the major components of aircraft structures to increase the load carrying capacity. Damage in the stiffener, mostly in the form of crack is an unavoidable problem in aerospace structures. Stiffener is bonded to the inner side of the aircraft panel which is not accessible for immediate inspection. A sensor-actuator network can be placed on the outer side of the panel that is accessible. Ultrasonic lamb waves are transmitted through stiffener using the sensoractuator network for detecting the presence of damages. The sensor-actuator network is placed on both halves of the stiffened section on the accessible surface of the plate. Detecting damage in stiffener by using this technique has significant potential for SHM technology. One of the major objectives of the present work is to determine the smallest detectable crack on the stiffener using the proposed technique. Wavelet based damage parameter correlation studies are carried out. In the proposed scheme, with increase in the damage size along the stiffener, it is found that the amplitude of the received signal decreases monotonically. The advantage of this technique is that the stiffened panels need not be disassembled in a realistic deployment of SHM system.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Kolappan Geetha, V. T. Rathod, D. Roy Mahapatra, and S. Gopalakrishnan "Lamb wave based detection of damage in a stiffener bonded to a plate", Proc. SPIE 7984, Health Monitoring of Structural and Biological Systems 2011, 79842X (18 April 2011); https://doi.org/10.1117/12.881097
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Wavelets

Sensor networks

Wave plates

Actuators

Structural health monitoring

Wave propagation

Back to Top