Translator Disclaimer
1 April 2011 Using synchrotron light to accelerate EUV resist and mask materials learning
Author Affiliations +
Proceedings Volume 7985, 27th European Mask and Lithography Conference; 798509 (2011)
Event: 27th European Mask and Lithography Conference, 2011, Dresden, Germany
As commercialization of extreme ultraviolet lithography (EUVL) progresses, direct industry activities are being focused on near term concerns. The question of long term extendibility of EUVL, however, remains crucial given the magnitude of the investments yet required to make EUVL a reality. Extendibility questions are best addressed using advanced research tools such as the SEMATECH Berkeley microfield exposure tool (MET) and actinic inspection tool (AIT). Utilizing Lawrence Berkeley National Laboratory's Advanced Light Source facility as the light source, these tools benefit from the unique properties of synchrotron light enabling research at nodes generations ahead of what is possible with commercial tools. The MET for example uses extremely bright undulator radiation to enable a lossless fully programmable coherence illuminator. Using such a system, resolution enhancing illuminations achieving k1 factors of 0.25 can readily be attained. Given the MET numerical aperture of 0.3, this translates to an ultimate resolution capability of 12 nm. Using such methods, the SEMATECH Berkeley MET has demonstrated resolution in resist to 16-nm half pitch and below in an imageable spin-on hard mask. At a half pitch of 16 nm, this material achieves a line-edge roughness of 2 nm with a correlation length of 6 nm. These new results demonstrate that the observed stall in ultimate resolution progress in chemically amplified resists is a materials issue rather than a tool limitation. With a resolution limit of 20-22 nm, the CAR champion from 2008 remains as the highest performing CAR tested to date. To enable continued advanced learning in EUV resists, SEMATECH has initiated a plan to implement a 0.5 NA microfield tool at the Advanced Light Source synchrotron facility. This tool will be capable of printing down to 8-nm half pitch.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick Naulleau, Christopher N. Anderson, Lorie-Mae Baclea-an, Paul Denham, Simi George, Kenneth A. Goldberg, Gideon Jones, Brittany McClinton, Ryan Miyakawa, Iacopo Mochi, Warren Montgomery, Seno Rekawa, and Tom Wallow "Using synchrotron light to accelerate EUV resist and mask materials learning", Proc. SPIE 7985, 27th European Mask and Lithography Conference, 798509 (1 April 2011);

Back to Top