Translator Disclaimer
1 April 2011 Actinic EUV-mask metrology: tools, concepts, components
Author Affiliations +
Proceedings Volume 7985, 27th European Mask and Lithography Conference; 79850B (2011)
Event: 27th European Mask and Lithography Conference, 2011, Dresden, Germany
There is a strong demand for standalone actinic tools for mask blank and mask metrology. We expect to deliver contributions to key issues for the infrastructure tools such as actinic reflectometer, actinic defect inspection and components like high brightness sources together with our partners. With our EUV-reflectometer EUV-MBR we are ready to fulfill HVM requirements in accurate and sensitive spectral metrology. Migrating from mask blanks to masks is supported with integrated fiducial mark detection and small spot sizes of down to < 0.03 mm2. Hence, the EUV-MBR is able to detect minimal variations on mask blank and can support process monitoring for our partners in European EXEPT project. For actinic blank inspection a proof of concept experiment based on an EUV microscope at BASC's EUV-Lamp allows for comparing actinic signatures with AFM scans. Results allow for extrapolation to sub 30 nm sensitivity and fast full blank scan. For LPP sources we demonstrated a new concept utilizing a laser, with parameters optimized for high brightness EUV generation and a new regenerative target concept for high position stability, gain, repetition rate operation and efficiency in the first proof of concept experiment. Up to 350 W/(mm2 sr) from < 20 μm source size have been demonstrated.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rainer Lebert, Azadeh Farahzadi, Wolfgang Diete, David Schäfer, Christoph Phiesel, Thomas Wilhein, Stefan Herbert, Aleksey Maryasov, Larissa Juschkin, Dominik Esser, Marco Hoefer, and Dieter Hoffmann "Actinic EUV-mask metrology: tools, concepts, components", Proc. SPIE 7985, 27th European Mask and Lithography Conference, 79850B (1 April 2011);

Back to Top