Paper
19 January 2011 Optical S-R latch demonstration using injection-locked single-mode FP-LD
Author Affiliations +
Proceedings Volume 7986, Passive Components and Fiber-Based Devices VII; 79860A (2011) https://doi.org/10.1117/12.888296
Event: Asia Communications and Photonics Conference and Exhibition, 2010, Shanghai, Shanghai, China
Abstract
An optical S-R latch is demonstrated using two injection locked single-mode (SM) Fabry-Perot laser diode (FP-LD). The S-R latch is based on the bi-stability and injection-locking properties of FP-LD. The latch performs simultaneous inverted and non-inverted outputs in set and reset states. The proposed latch performs very well both in set and reset conditions. The switching times of the latch both for inverted and non-inverted outputs in set and reset conditions were measured by oscilloscope and recorded as about 90 ps. For the latching function, very low powers of set and reset signal were required. Power of set signal was -17 dBm and that of reset signal was -7 dBm.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Rakib-Uddin, Tran Q. Hoai, Bikash Nakarmi, and Yong Hyub Won "Optical S-R latch demonstration using injection-locked single-mode FP-LD", Proc. SPIE 7986, Passive Components and Fiber-Based Devices VII, 79860A (19 January 2011); https://doi.org/10.1117/12.888296
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Logic

Switching

Oscilloscopes

Picosecond phenomena

Digital signal processing

Semiconductor lasers

Binary data

Back to Top