Paper
26 July 2011 Dynamic pulsing of a MOPA fiber laser
Author Affiliations +
Proceedings Volume 8001, International Conference on Applications of Optics and Photonics; 80010T (2011) https://doi.org/10.1117/12.892161
Event: International Conference on Applications of Optics and Photonics, 2011, Braga, Portugal
Abstract
Dynamic Pulsing is demonstrated using a pulsed MOPA fiber laser at 1064nm. The output of the MOPA laser is a pulsed profile consisting of a burst of closely spaced pulses. Tests were performed under several materials with pulse bursts ranging from 10ns to 1μs and operating from 500kHz down to single shot. In particular, percussion drilling in stainless steel is demonstrated showing improvements in quality and speed of the process. These profiles allow high flexibility and optimization of the process addressing the specificity of the end application. Dynamic Pulsing allows the same MOPA fiber laser to be used in diverse materials as well as different processes such us marking, drilling, scribing and engraving. The pulsed fiber laser used in this study is a MOPA-DY by Multiwave Photonics. It is based on a modulated seed laser followed by a series of fiber amplifiers and ending with an optically isolated collimator. This pulsed laser model has an output in such a way that each trigger produces a fast burst of pulses, with a repetition frequency within the burst of the order of tens of MHz. Within the burst it is possible to change the number of pulses, the individual pulse profile, burst pulse period and even to generate non-periodic burst pulse separations. The laser allows full freedom for all these combinations. The study here reported compares the impact of pulse peak power, number of pulses within a burst and the pulse burst period, on process quality (heat affected zone, debris, hole uniformity) and drilling yield.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rosa Romero, Paulo T. Guerreiro, Sami T. Hendow, and José R. Salcedo "Dynamic pulsing of a MOPA fiber laser", Proc. SPIE 8001, International Conference on Applications of Optics and Photonics, 80010T (26 July 2011); https://doi.org/10.1117/12.892161
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Pulsed laser operation

Laser drilling

Laser processing

Modulation

Photonics

Sensors

Back to Top