PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The underground movement of water through soil and rock is an important phenomenon in Civil Engineering. Its study
is made more appealing to students if small scale prototypes are used, where several layouts of soil and water in steady
state/transient conditions can be studied in detail. A water tank prototype was built with a reflective optical fibre pressure
sensor based on a GRIN lens and a mirror. The mirror is connected to an elastic membrane that is deformed when water
pressure is applied and the lens is correctly aligned with the mirror and fixed. The distance between the mirror and the
lens changes, so the reflective optical power changes as well and it is directly proportional to the water pressure inside
the tank. The results obtained for water pressure up to 4 kPa for filling and emptying operations show that the sensor has
a linear response for pressure changes between 1.7 kPa and 3.4 kPa with a slope of 181 μW/kPa for filling and
191 μW/kPa for emptying. It is also observed some hysteresis that may possibly be reduced by choosing another material
for the membrane. Using this type of sensor head it is possible to monitor different pressure points in the small scale
prototype using the standard OTDR (Optical Time Domain Reflectometer) equipment.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
L. Coelho, N. Freitas, J. M. Baptista, O. Frazão, J. L. Santos, T. Restivo, J. Marques, "Optical fibre pressure sensors for small scale studies of groundwater flow," Proc. SPIE 8001, International Conference on Applications of Optics and Photonics, 80013V (26 July 2011); https://doi.org/10.1117/12.891913