Paper
20 May 2011 A high fill-factor high-SNR CMOS image sensor for IR camera applications
Varun Shenoy, Daniel McBride, Sungyong Jung, Hyejin Moon, Sang-Yeon Cho
Author Affiliations +
Abstract
A high-fill factor/high-SNR CMOS readout integrated circuit (ROIC) array is designed for high dynamic range infrared imaging systems. The designed ROIC array uses a single reference photodiode that is routed to each unit cell in the array to subtract the dark current for high SNR and high fill factor. The achieved average SNR is 80 dB and the fill factor is 28% with a 25 x 25 μm2 unit cell size. With this new unit cell and routing approach, the size of the unit cell is reduced by 300% compared to other high SNR circuits. The maximum power consumption per unit pixel is 500nW.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Varun Shenoy, Daniel McBride, Sungyong Jung, Hyejin Moon, and Sang-Yeon Cho "A high fill-factor high-SNR CMOS image sensor for IR camera applications", Proc. SPIE 8012, Infrared Technology and Applications XXXVII, 80120J (20 May 2011); https://doi.org/10.1117/12.884212
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Readout integrated circuits

Photodiodes

CMOS sensors

Infrared cameras

Infrared imaging

Capacitors

Back to Top