Modeling and analysis of a micromachined piezoelectric energy harvester stimulated by ambient random vibrations

Ali B. Alamin Dow; Hasan A. Al-Rubaye; David Koo; Michael Schneider; Achim Bittner; Ulrich Schmid; Nazir P. Kherani

doi:10.1117/12.885861

5 May 2011 Modeling and analysis of a micromachined piezoelectric energy harvester stimulated by ambient random vibrations

Ali B. Alamin Dow, Hasan A. Al-Rubaye, David Koo, Michael Schneider, Achim Bittner, Ulrich Schmid, Nazir P. Kherani

Author Affiliations +

Proceedings Volume 8066, Smart Sensors, Actuators, and MEMS V; 806612 (2011) https://doi.org/10.1117/12.885861
Event: SPIE Microtechnologies, 2011, Prague, Czech Republic

Abstract

Piezoelectric energy microgenerators are devices that continuously generate electricity when they are subjected to varying mechanical strain due to vibrations. They can generate electrical power up to 100 μW which can be used to drive various sensing and actuating MEMS devices. Today, piezoelectric energy harvesters are considered autonomous and reliable energy sources to actuate low power microdevices such as wireless sensor networks, indoor-outdoor monitoring, facility management and biomedical applications. The advantages of piezoelectric energy harvesters including high power density, moderate output power and CMOS compatible fabrication in particular with aluminum nitride (AlN) have fuelled and motivated researchers to develop MEMS based energy harvesters. Recently, the use of AlN as a piezoelectric material has increased fabrication compatibility, enabling the realization of smart integrated systems on chip which include sensors, actuators and energy storage. Piezoelectric MEMS energy microgenerator is used to capture and transform the available ambient mechanical vibrations into usable electric energy via resonant coupling in the thin film piezoelectric material. Analysis and modeling of piezoelectric energy generators are very important aspects for improved performance. Aluminum nitride as the piezoelectric material is sandwiched between two electrodes. The device design includes a silicon cantilever on which the AlN film is deposited and which features a seismic mass at the end of the cantilever. Beam theory and lumped modeling with circuit elements are applied for modeling and analysis of the device operation at various acceleration values. The model shows good agreement with the experimental findings, thus giving confidence in the model.

Citation Download Citation

Ali B. Alamin Dow, Hasan A. Al-Rubaye, David Koo, Michael Schneider, Achim Bittner, Ulrich Schmid, and Nazir P. Kherani "Modeling and analysis of a micromachined piezoelectric energy harvester stimulated by ambient random vibrations", Proc. SPIE 8066, Smart Sensors, Actuators, and MEMS V, 806612 (5 May 2011); https://doi.org/10.1117/12.885861

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available