State of polarization mapping using a calibrated interferometric polarimeter

Dinesh N. Naik; Rakesh Kumar Singh; Hitoshi Itou; Yoko Miyamoto; Mitsuo Takeda

doi:10.1117/12.888964

27 May 2011 State of polarization mapping using a calibrated interferometric polarimeter

Dinesh N. Naik, Rakesh Kumar Singh, Hitoshi Itou, Yoko Miyamoto, Mitsuo Takeda

Proceedings Volume 8082, Optical Measurement Systems for Industrial Inspection VII; 80821T (2011) https://doi.org/10.1117/12.888964
Event: SPIE Optical Metrology, 2011, Munich, Germany

Abstract

We propose a simple scheme for accurate state of polarization (SOP) mapping with an interferometric polarimeter using Fourier transform method of fringe analysis. In single shot polarimeters that use Fourier transform method of fringe analysis, a spatial carrier frequency is introduced in the fringes of recorded interferogram either by introducing the relative tilt between the sample beam under test and a reference beam, as demonstrated by Ohtsuka and Oka or by passing the sample beam through birefringent optical components such as Wollaston prisms as demonstrated by Oka and Kaneko. In this technique, the amount of spatial carrier frequency that enabled to filter different terms in the Fourier spectrum of the recorded interferogram had to be calibrated with the use of light with a known SOP. Even in this case, the spatial carrier frequency introduced in the recorded interferogram is influenced by the relative tilt of the beam used for calibration. To eliminate the linear phase introduced by spatial carrier frequency, usually the spectrum around the carrier frequency location in the Fourier transform is shifted and brought to the centre. During this process an error of a fraction of a pixel in the shifting of the spectrum after filtering to remove the linear phase introduced by spatial carrier frequency will drastically change the measured SOP of light. For accurate SOP mapping, it is important that we eliminate the artifacts and errors due to the spatial carrier frequency in the single shot polarimeter that are otherwise very promising. In the present work, we propose a Mach-Zehnder interferometric polarimeter that uses a common path Sagnac interferometer to generate reference beams with orthogonal state of polarization. By taking advantage of the inherent stability of the proposed common path Sagnac interferometer against surrounding vibrations and air turbulences, a simple calibration scheme using a light of known state of polarization is used to map the state of polarization with better accuracy.

Citation Download Citation

Dinesh N. Naik, Rakesh Kumar Singh, Hitoshi Itou, Yoko Miyamoto, and Mitsuo Takeda "State of polarization mapping using a calibrated interferometric polarimeter", Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80821T (27 May 2011); https://doi.org/10.1117/12.888964

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available