Translator Disclaimer
6 June 2011 S. Peter Martyr (Rieti, Italy): a study case for 3D color laser scanner (RGB-ITR)
Author Affiliations +
Since several years our laboratory in ENEA Frascati Research Center is involved in development of laser scanners for Cultural Heritage investigation problems. Actually the best result obtained in this field by our laboratory is a 3D Red Green Blue Laser scanner, called RGB-ITR: the main feature of this scanner, further then measuring distances (up to 20m with a sub-millimetric resolution), is the ability to capture remotely color information by three calibrated laser sources: this information is collected for each point sampled by the instrument and is not affected by external light sources' influence. Moreover the ability to acquire color and distance information at the same time and for each point decrease drastically the post-production pipeline of a complete mesh. In this work the results of a complete scan of S. Peter Martyr in Rieti are shown, highlighting the efficiency and robustness of color calibration algorithms introduced for a correct color representation.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Massimiliano Guarneri, Giorgio Fornetti, Mario Ferri De Collibus, Massimo Francucci, Roberto Ricci, and Marcello Nuvoli "S. Peter Martyr (Rieti, Italy): a study case for 3D color laser scanner (RGB-ITR)", Proc. SPIE 8084, O3A: Optics for Arts, Architecture, and Archaeology III, 80840N (6 June 2011);

Back to Top