Paper
21 September 2011 Common path optical design for 2D inspection system with the capability of auto-focusing
Wei Cheng Wang, Shih-Hsuan Kuo, Leh-Rong Chang, Hau-Wei Wang
Author Affiliations +
Abstract
This paper developed an optical design approach to combine the auto-focusing and image sensing in the 2D inspection system. The focusing principle here employed the chromatic confocal microscopy due to the one-shot focusing capability. The system held a special issue that the chromatic confocal microscopy has the higher optical dispersion characteristic than the 2D image sensor which captures a clear image for the optical inspection. Hence, the system here must be designed to be characterized with both the higher and lower optical dispersion, which was called as the common path optical design in this study. That is, an optical approach must be developed to divide and switch the above totally different dispersion conditions. Accordingly, the higher dispersion device, the chromatic confocal sensor, examined the object surface height to vertically vary the focused position of the 2D inspection system. Furthermore, the lower dispersion device, the 2D image sensor, can be adjusted to focus onto the object surface so that a clearly focusing image can be acquired. The experimental results were also provided to ensure this approach can automatically focus the object surface and then the clear image can be captured to perform optical inspection to obtain the position, dimension or area.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Cheng Wang, Shih-Hsuan Kuo, Leh-Rong Chang, and Hau-Wei Wang "Common path optical design for 2D inspection system with the capability of auto-focusing", Proc. SPIE 8167, Optical Design and Engineering IV, 81670J (21 September 2011); https://doi.org/10.1117/12.897267
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Image sensors

Confocal microscopy

Colorimetry

Sensors

Light sources

Image processing

Back to Top