You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
2 February 1988Comparison Of Effective Medium Procedures For Optical Modeling Of Laminar Structures
This study addresses the question, "How can the optical properties of matter in ultrathin amorphous nonmetallic films in multilayers best be determined from reflectance (R) and transmission (T) measurements." A blue shift in the band gap of plasma CVD a-Si:H/a-SiN.:H multilayers was reported sev-eral years ago. It was suggested that the shift in the band gap, Eg, relative to bulk a-Si:H as given by the Tauc plot was due to quantum confinement effects. The purpose of this study is to evaluate the usefulness of various effective media theories (EMT) for determining the optical constants of materials in a multilayer and to explore to what extent a shift in band gap to higher energy may be an artifact of the method of optical analysis. Incoherent approaches are the most common methods of determining band gap from R and T. These do not require iteration to obtain optical constants from the optical data. The band gap determined by such methods was, however, generally 8% higher than the actual band gap when a suitable hypothetical case was investigated. Coherent effective media theory provides a noteworthy alternative to both incoherent EMT and fully coherent multilayer modeling, (which is accurate but is excessively com-plicated and poorly convergent). The accuracy of the band gap is at the limit, 2-3%, of what can be expected for graphical methods. A previously unappreciated source of optical artifacts was also identified. Dispersion, which is commonly ignored when Eg is determined graphically, is shown to distort, in certain cases, the anticipated straight line behavior of the aE vs. E plot.
The alert did not successfully save. Please try again later.
Robert F. Edgerton, David D. Allred, "Comparison Of Effective Medium Procedures For Optical Modeling Of Laminar Structures," Proc. SPIE 0821, Modeling of Optical Thin Films, (2 February 1988); https://doi.org/10.1117/12.941854