Spatial resolution and sensitivity in photoacoustic tomography taking noise into account: from point-like detectors to large integrating detectors

Peter Burgholzer; Thomas Berer; Hubert Grün; Robert Nuster; Günther Paltauf

doi:10.1117/12.908451

23 February 2012 Spatial resolution and sensitivity in photoacoustic tomography taking noise into account: from point-like detectors to large integrating detectors

Peter Burgholzer, Thomas Berer, Hubert Grün, Robert Nuster, Günther Paltauf

Author Affiliations +

Proceedings Volume 8223, Photons Plus Ultrasound: Imaging and Sensing 2012; 822321 (2012) https://doi.org/10.1117/12.908451
Event: SPIE BiOS, 2012, San Francisco, California, United States

Abstract

As for any other imaging technique spatial resolution and sensitivity are important features for a photoacoustic imaging device. It is already well known that spatial resolution depends on the size and the bandwidth of the detectors. Therefore for photoacoustic image reconstruction usually small point-like and broadband detectors are assumed, which measure the pressure as a function of time on a detection surface around the sample. But in reality point-like detectors are not ideal at all: because of the small detector volume the thermodynamic fluctuations (= noise) get high and the signal amplitude is low, which results in a bad signal-to-noise ratio (SNR). For a bigger detector volume the fluctuations are less and the signal amplitude is better, which gives a better SNR. But on the other hand the photoacoustic pressure signal is averaged over the whole detector volume, which results in blurring and a reduced spatial resolution if reconstruction algorithms for point-like detectors are used. To characterize this trade-off between spatial resolution and sensitivity for a varying detector volume in a quantitative way the pressure is described by a random variable having the measured pressure as a mean value and noise as random fluctuations around that mean value ("stochastic process"). For a PVDF detector the optimum for the detector size is given.

Citation Download Citation

Peter Burgholzer, Thomas Berer, Hubert Grün, Robert Nuster, and Günther Paltauf "Spatial resolution and sensitivity in photoacoustic tomography taking noise into account: from point-like detectors to large integrating detectors", Proc. SPIE 8223, Photons Plus Ultrasound: Imaging and Sensing 2012, 822321 (23 February 2012); https://doi.org/10.1117/12.908451

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available