You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
15 February 2012Advances in performance and miniaturization of a FT-IR spectrometer system based on a large stroke MOEMS piston mirror
Standard FT-IR spectrometers are large, usually static, and expensive and require operation by qualified personnel. The
presented development involves achievements in MEMS technologies and electronics design to address size, speed and
power requirements and develop a fully integrated miniaturized FT-IR spectrometer. A suitably matched interaction of
multiple new components - source, interferometer, detector and control and data processing - develops unique MEMS
based spectrometers capable of reliable operation and finally results in compact, robust and economical analyzers. The
presented system now aims at a high performance level to measure in the range between 5000-750 cm-1 at a spectral
resolution better than 10 cm-1. The Michelson interferometer design and the desired performance put several demands on
the MOEMS device. Amongst these, a mirror travel of ± 500 μm and a minimal dynamic deformation of < λ/10 peak-to
peak in combination with a large mirror aperture of 5 mm were the most challenging goals. However, a signal-to-noise
ratio of 1000 is required to qualify a FT-IR system as a sensor for industrial applications e.g. process control. The
purpose of the system, presented in this work, is to proof that this is feasible on the basis of MEMS technology and it is
demonstrated that most of these specifications could be already met.
The alert did not successfully save. Please try again later.
Andreas Kenda, Thilo Sandner, Stephan Lüttjohann, Martin Kraft, Andreas Tortschanoff, Arno Simon, "Advances in performance and miniaturization of a FT-IR spectrometer system based on a large stroke MOEMS piston mirror," Proc. SPIE 8252, MOEMS and Miniaturized Systems XI, 82520D (15 February 2012); https://doi.org/10.1117/12.908273