Paper
2 June 2012 The research on the micro-processing-used all-solid-state picosecond laser
Zhen-xu Bai, Qing-kang Ai, Jin-peng Duan, Meng Chen, Gang Li
Author Affiliations +
Proceedings Volume 8334, Fourth International Conference on Digital Image Processing (ICDIP 2012); 83340K (2012) https://doi.org/10.1117/12.946044
Event: Fourth International Conference on Digital Image Processing (ICDIP 2012), 2012, Kuala Lumpur, Malaysia
Abstract
A micro processing used LD end-pumped Nd:YVO4 all solid-state picosecond pulse laser was demonstrated under the semiconductor saturable absorption mirror(SESAM) mode-locking technology and regeneration amplifier technology, by using BBO crystal as electro-optic crystal and diode-side-pumped Nd:YAG. 1064nm laser was obtained with 1.47mJ single pulse energy, 15ps pulse width at 1 kHz repetition rate and the pulse energy fluctuation was less than 0.6% in 3 hours operation. Finally, through the galvanometric we got the beam focused, realizing the steel plate processing which thickness was 0.5mm and the aperture radius was 25.5μm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhen-xu Bai, Qing-kang Ai, Jin-peng Duan, Meng Chen, and Gang Li "The research on the micro-processing-used all-solid-state picosecond laser", Proc. SPIE 8334, Fourth International Conference on Digital Image Processing (ICDIP 2012), 83340K (2 June 2012); https://doi.org/10.1117/12.946044
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picosecond phenomena

Pulsed laser operation

Mode locking

Laser processing

Optical amplifiers

Laser applications

Semiconductor lasers

RELATED CONTENT


Back to Top